Clogged drains can cause lots of frustration and inconvenience. Especially if they are constantly reoccurring. And if that is the case, please stop reading this post and contact a professional ASAP. As a recurrent blockage should not receive DIY treatment. However, if you are experiencing a minor, once-off clog, here are three DIY tips for drain cleaning that can help get your drains flowing freely again.
1. Use Boiling Water to Break Up Grease and Soap Build-Up
If you find your drains are slow or clogged, the first thing to try is boiling water. Boiling hot water can break down grease and soap build-up in your pipes. Essentially it flushes out the clog. Just slowly and carefully pour the boiling water into your drains. And wait a few minutes before flushing with cold water. This simple solution could be enough to get your drain running smoothly again. Avoid this method if you have any PVC pipes. As boiling water can potentially melt clogged PVC. And you could create a larger problem than a clog.
2. Use Baking Soda and Vinegar as DIY Drain Cleaning Method
Another DIY trick for cleaning your drains is to make a mixture of baking soda and vinegar. Pour half a cup of baking soda down the drain. Follow this with half a cup of white distilled vinegar. The reaction between the two ingredients will generate foaming bubbles. That can ultimately help break up any clogs in your pipes. Leave it to sit for roughly 15 minutes. Then rinse with boiling water.
3. Make Use of a Wire Coat Hanger to Extract Obstructions
Our final DIY drain cleaning tip involves utilising a wire hanger. Only attempt this method if a clog is due to a known obstruction. Such as hair. Or clothing. To utilise this method, unbend the coat hanger and use it as a long hook. The goal is to pull out the obstruction that is likely in the U-turn at the bottom of your drain. Be careful not to push anything further down. And if you can’t get a grip on debris, call in the professionals for more assistance.